SLEEVES

An extremely accurate mounting system for use on those arbors that are not threaded. For use on moulders, tenon machines etc.

• A welded design.
• The sleeve O.D. is threaded and supplied with a knurled ring nut that has 3 set screws in it. The set screws are tightened after the nut is tightened by hand against the assembly.
• Tools can be fastened by using the bolts through the flange or using the knurled ring nut and set screws.

Non-Hydro Sleeve

Hydro Sleeve

Hydro-Sleeves are used in conjunction with various types of tooling to allow for several tools to be mounted as a unit, convert straight bore tooling into hydro, and improve tool run-out by more accurately cantering onto a spindle.

The hydraulic sleeves are designed for a light press fit against the tool. This means that the unit must be fastened together by screws.

When pressurized, the sleeves expands only against the spindle.